The NEW Forensic Quest®
(Part # F-QUEST-2)

spacer gif Product Comparison

Forensic Quest®


The Forensic Quest® is a feature packed hand-held forensic data capture device perfect for in-the-field or in-the-lab hard drive data acquisition and verification.This powerful solution provides unmatched performance at a cost-effective price point.

The sleek compact design features a user friendly touch screen, choice of SHA-256 or MD5 authentication, DD imaging, native write-protect and built-in USB connectivity. The Forensic Quest also supports captures from DCO and HPA protected areas of the source drive. Built-in support for SATA/IDE drives is featured and support for both SCSI and SAS hard drives is available with optional adapters.

This one-to-one hard drive data capture solution also features the convenience of support for one-to-two hard drive capture with an optional adapter.

A Wipe feature allows the user to wipe destination drives to DoD Wipe specifications and a "save configuration" setting allows users the option to save frequently used capture settings.

Optional adapters for CompactFlash, 2.5” and 1.8” drives and optional cables for both eSATA and MicroSATA drives are available.

The intelligent Quest is the perfect solution for the demanding requirements of law enforcement, military, corporate security and public and private investigators.

Part Number: F-QUEST-2

Click here for product support Download PDF Datasheet
 
Features Software Optional Hardware Specifications
    F-CABLE-5U
F-CABLE-5U
OmniClone™ 5" UDMA IDE and power cables (1 set). 5" UDMA IDE and power cable set. Replacement cable set fo UDMA model cloners.
    F-CABLE-9U
F-CABLE-9U
OmniClone™ 9" UDMA IDE and power cables (1 set). 9" IDE and power cable set. Replacement cable set for UDMA model cloners.
   F-CABLE-30U
F-CABLE-30U
18" Extended OnmiClone UDMA IDE and power cables (1 set). 18" extended IDE and power cable set. Extended reach may be necessary for situations when user removes the cover of the pc and does not want to physically remove the hard drive from the system. Cables to be purchased for any UDMA model cloner.
Battery Pack
Battery Pack

The rechargeable Battery Pack enables extended use of the device. For use with Echo Plus, Sonix, SuperSonix, Quest, Talon and MD5 models.

CloneCard Pro
CloneCard Pro
This PCMCIA adapter allows data transfer rates up to 175 MB/min.
F-ADP-1.8
F-ADP-1.8

1.8" IDE Drive Adapter for Toshiba hard drives.

F-ADP-COMP-FL
F-ADP-COMP-FL

Compact Flash adapter; to be used for bare flash media and microdrives. User may connect Logicube IDE cable to CF adapter for flow through of information during cloning process. Adapter comes with its' own power lead which fits directly into any of the logicube duplicators

F-ADP-SAS
F-ADP-SAS

The SAS Adapter allows you to capture from a SAS source drive to either a SATA or IDE destination drive when used with the Forensic Dossier or Forensic Quest-2.  The SAS Adapter can also be used with  the SuperSonix to clone SAS source hard drives to SATA/IDE/SAS destination drives.

F-ADP-SCSI
F-ADP-SCSI

The SCSI Adapter allows you to capture from a SCSI source drive to either a SATA or IDE destination drive when used with the Forensic Dossier or Forensic Quest-2. 

F-ADP-STND
F-ADP-STND

2.5" laptop adapter to be used for bare laptop drive IDE connections. User may connect standard IDE cable to 2.5" adapter for flow through of information during cloning process. Adapter comes with its' own power lead which fits directly into any of the logicube duplicators. (Quantity 1)

F-ADP-STND-3A
F-ADP-STND-3A
2.5" laptop adapter. 40 to 44 pin adapter to be used for bare laptop drive IDE connections. User may connect standard IDE cable to 2.5" adapter for flow through of information during cloning process. Adapter comes with its' own power lead which fits directly into any of the logicube duplicators. (Quantity 3)
F-ADP-STND-6A
F-ADP-STND-6A
2.5" laptop adapter. 40 to 44 pin adapter to be used for bare laptop drive IDE connections. User may connect standard IDE cable to 2.5" adapter for flow through of information during cloning process. Adapter comes with its' own power lead which fits directly into any of the logicube duplicators. (Quantity 6)
F-ADP-ZIF
F-ADP-ZIF
1.8" ZIF (Zero Insertion Force) Drive Adapter for Hitachi and Toshiba hard drives. 40 pin adapter to be used for bare drive IDE connections. Includes two cables (thick and thin).
F-CABLE-ESATA
F-CABLE-ESATA
Cable for eSATA drives. Compatible for use with EchoPlus, Sonix, SuperSonix, OmniClone 2Xi, 5Xi, 10XI, OmniSAS, Quest, Talon, Dossier
F-CABLE-MCRSATA
F-CABLE-MCRSATA
Cable for microSATA hard drives for use with Sonix, SuperSonix, Quest, EchoPlus, Dossier, Talon
F-CABLE-SATA18
F-CABLE-SATA18
18" Extended length Serial ATA Cable set for the Sonix, Talon, Echo Plus and Quest
OmniPort (IT Version)
OmniPort (IT Version)
Today’s media comes in a variety of forms. This slick little accessory allows immediate access to USB flash drives.
Warranties
Warranties
Logicube offers extended warranties for an added cost on most products. Contact our sales team for more information






Markets - Support - Sales - Company Profile - Legal
Logicube Forensics Sitemap - Contact